readerc.go 13.8 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434
// 
// Copyright (c) 2011-2019 Canonical Ltd
// Copyright (c) 2006-2010 Kirill Simonov
// 
// Permission is hereby granted, free of charge, to any person obtaining a copy of
// this software and associated documentation files (the "Software"), to deal in
// the Software without restriction, including without limitation the rights to
// use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
// of the Software, and to permit persons to whom the Software is furnished to do
// so, subject to the following conditions:
// 
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
// 
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.

package yaml

import (
	"io"
)

// Set the reader error and return 0.
func yaml_parser_set_reader_error(parser *yaml_parser_t, problem string, offset int, value int) bool {
	parser.error = yaml_READER_ERROR
	parser.problem = problem
	parser.problem_offset = offset
	parser.problem_value = value
	return false
}

// Byte order marks.
const (
	bom_UTF8    = "\xef\xbb\xbf"
	bom_UTF16LE = "\xff\xfe"
	bom_UTF16BE = "\xfe\xff"
)

// Determine the input stream encoding by checking the BOM symbol. If no BOM is
// found, the UTF-8 encoding is assumed. Return 1 on success, 0 on failure.
func yaml_parser_determine_encoding(parser *yaml_parser_t) bool {
	// Ensure that we had enough bytes in the raw buffer.
	for !parser.eof && len(parser.raw_buffer)-parser.raw_buffer_pos < 3 {
		if !yaml_parser_update_raw_buffer(parser) {
			return false
		}
	}

	// Determine the encoding.
	buf := parser.raw_buffer
	pos := parser.raw_buffer_pos
	avail := len(buf) - pos
	if avail >= 2 && buf[pos] == bom_UTF16LE[0] && buf[pos+1] == bom_UTF16LE[1] {
		parser.encoding = yaml_UTF16LE_ENCODING
		parser.raw_buffer_pos += 2
		parser.offset += 2
	} else if avail >= 2 && buf[pos] == bom_UTF16BE[0] && buf[pos+1] == bom_UTF16BE[1] {
		parser.encoding = yaml_UTF16BE_ENCODING
		parser.raw_buffer_pos += 2
		parser.offset += 2
	} else if avail >= 3 && buf[pos] == bom_UTF8[0] && buf[pos+1] == bom_UTF8[1] && buf[pos+2] == bom_UTF8[2] {
		parser.encoding = yaml_UTF8_ENCODING
		parser.raw_buffer_pos += 3
		parser.offset += 3
	} else {
		parser.encoding = yaml_UTF8_ENCODING
	}
	return true
}

// Update the raw buffer.
func yaml_parser_update_raw_buffer(parser *yaml_parser_t) bool {
	size_read := 0

	// Return if the raw buffer is full.
	if parser.raw_buffer_pos == 0 && len(parser.raw_buffer) == cap(parser.raw_buffer) {
		return true
	}

	// Return on EOF.
	if parser.eof {
		return true
	}

	// Move the remaining bytes in the raw buffer to the beginning.
	if parser.raw_buffer_pos > 0 && parser.raw_buffer_pos < len(parser.raw_buffer) {
		copy(parser.raw_buffer, parser.raw_buffer[parser.raw_buffer_pos:])
	}
	parser.raw_buffer = parser.raw_buffer[:len(parser.raw_buffer)-parser.raw_buffer_pos]
	parser.raw_buffer_pos = 0

	// Call the read handler to fill the buffer.
	size_read, err := parser.read_handler(parser, parser.raw_buffer[len(parser.raw_buffer):cap(parser.raw_buffer)])
	parser.raw_buffer = parser.raw_buffer[:len(parser.raw_buffer)+size_read]
	if err == io.EOF {
		parser.eof = true
	} else if err != nil {
		return yaml_parser_set_reader_error(parser, "input error: "+err.Error(), parser.offset, -1)
	}
	return true
}

// Ensure that the buffer contains at least `length` characters.
// Return true on success, false on failure.
//
// The length is supposed to be significantly less that the buffer size.
func yaml_parser_update_buffer(parser *yaml_parser_t, length int) bool {
	if parser.read_handler == nil {
		panic("read handler must be set")
	}

	// [Go] This function was changed to guarantee the requested length size at EOF.
	// The fact we need to do this is pretty awful, but the description above implies
	// for that to be the case, and there are tests

	// If the EOF flag is set and the raw buffer is empty, do nothing.
	if parser.eof && parser.raw_buffer_pos == len(parser.raw_buffer) {
		// [Go] ACTUALLY! Read the documentation of this function above.
		// This is just broken. To return true, we need to have the
		// given length in the buffer. Not doing that means every single
		// check that calls this function to make sure the buffer has a
		// given length is Go) panicking; or C) accessing invalid memory.
		//return true
	}

	// Return if the buffer contains enough characters.
	if parser.unread >= length {
		return true
	}

	// Determine the input encoding if it is not known yet.
	if parser.encoding == yaml_ANY_ENCODING {
		if !yaml_parser_determine_encoding(parser) {
			return false
		}
	}

	// Move the unread characters to the beginning of the buffer.
	buffer_len := len(parser.buffer)
	if parser.buffer_pos > 0 && parser.buffer_pos < buffer_len {
		copy(parser.buffer, parser.buffer[parser.buffer_pos:])
		buffer_len -= parser.buffer_pos
		parser.buffer_pos = 0
	} else if parser.buffer_pos == buffer_len {
		buffer_len = 0
		parser.buffer_pos = 0
	}

	// Open the whole buffer for writing, and cut it before returning.
	parser.buffer = parser.buffer[:cap(parser.buffer)]

	// Fill the buffer until it has enough characters.
	first := true
	for parser.unread < length {

		// Fill the raw buffer if necessary.
		if !first || parser.raw_buffer_pos == len(parser.raw_buffer) {
			if !yaml_parser_update_raw_buffer(parser) {
				parser.buffer = parser.buffer[:buffer_len]
				return false
			}
		}
		first = false

		// Decode the raw buffer.
	inner:
		for parser.raw_buffer_pos != len(parser.raw_buffer) {
			var value rune
			var width int

			raw_unread := len(parser.raw_buffer) - parser.raw_buffer_pos

			// Decode the next character.
			switch parser.encoding {
			case yaml_UTF8_ENCODING:
				// Decode a UTF-8 character.  Check RFC 3629
				// (http://www.ietf.org/rfc/rfc3629.txt) for more details.
				//
				// The following table (taken from the RFC) is used for
				// decoding.
				//
				//    Char. number range |        UTF-8 octet sequence
				//      (hexadecimal)    |              (binary)
				//   --------------------+------------------------------------
				//   0000 0000-0000 007F | 0xxxxxxx
				//   0000 0080-0000 07FF | 110xxxxx 10xxxxxx
				//   0000 0800-0000 FFFF | 1110xxxx 10xxxxxx 10xxxxxx
				//   0001 0000-0010 FFFF | 11110xxx 10xxxxxx 10xxxxxx 10xxxxxx
				//
				// Additionally, the characters in the range 0xD800-0xDFFF
				// are prohibited as they are reserved for use with UTF-16
				// surrogate pairs.

				// Determine the length of the UTF-8 sequence.
				octet := parser.raw_buffer[parser.raw_buffer_pos]
				switch {
				case octet&0x80 == 0x00:
					width = 1
				case octet&0xE0 == 0xC0:
					width = 2
				case octet&0xF0 == 0xE0:
					width = 3
				case octet&0xF8 == 0xF0:
					width = 4
				default:
					// The leading octet is invalid.
					return yaml_parser_set_reader_error(parser,
						"invalid leading UTF-8 octet",
						parser.offset, int(octet))
				}

				// Check if the raw buffer contains an incomplete character.
				if width > raw_unread {
					if parser.eof {
						return yaml_parser_set_reader_error(parser,
							"incomplete UTF-8 octet sequence",
							parser.offset, -1)
					}
					break inner
				}

				// Decode the leading octet.
				switch {
				case octet&0x80 == 0x00:
					value = rune(octet & 0x7F)
				case octet&0xE0 == 0xC0:
					value = rune(octet & 0x1F)
				case octet&0xF0 == 0xE0:
					value = rune(octet & 0x0F)
				case octet&0xF8 == 0xF0:
					value = rune(octet & 0x07)
				default:
					value = 0
				}

				// Check and decode the trailing octets.
				for k := 1; k < width; k++ {
					octet = parser.raw_buffer[parser.raw_buffer_pos+k]

					// Check if the octet is valid.
					if (octet & 0xC0) != 0x80 {
						return yaml_parser_set_reader_error(parser,
							"invalid trailing UTF-8 octet",
							parser.offset+k, int(octet))
					}

					// Decode the octet.
					value = (value << 6) + rune(octet&0x3F)
				}

				// Check the length of the sequence against the value.
				switch {
				case width == 1:
				case width == 2 && value >= 0x80:
				case width == 3 && value >= 0x800:
				case width == 4 && value >= 0x10000:
				default:
					return yaml_parser_set_reader_error(parser,
						"invalid length of a UTF-8 sequence",
						parser.offset, -1)
				}

				// Check the range of the value.
				if value >= 0xD800 && value <= 0xDFFF || value > 0x10FFFF {
					return yaml_parser_set_reader_error(parser,
						"invalid Unicode character",
						parser.offset, int(value))
				}

			case yaml_UTF16LE_ENCODING, yaml_UTF16BE_ENCODING:
				var low, high int
				if parser.encoding == yaml_UTF16LE_ENCODING {
					low, high = 0, 1
				} else {
					low, high = 1, 0
				}

				// The UTF-16 encoding is not as simple as one might
				// naively think.  Check RFC 2781
				// (http://www.ietf.org/rfc/rfc2781.txt).
				//
				// Normally, two subsequent bytes describe a Unicode
				// character.  However a special technique (called a
				// surrogate pair) is used for specifying character
				// values larger than 0xFFFF.
				//
				// A surrogate pair consists of two pseudo-characters:
				//      high surrogate area (0xD800-0xDBFF)
				//      low surrogate area (0xDC00-0xDFFF)
				//
				// The following formulas are used for decoding
				// and encoding characters using surrogate pairs:
				//
				//  U  = U' + 0x10000   (0x01 00 00 <= U <= 0x10 FF FF)
				//  U' = yyyyyyyyyyxxxxxxxxxx   (0 <= U' <= 0x0F FF FF)
				//  W1 = 110110yyyyyyyyyy
				//  W2 = 110111xxxxxxxxxx
				//
				// where U is the character value, W1 is the high surrogate
				// area, W2 is the low surrogate area.

				// Check for incomplete UTF-16 character.
				if raw_unread < 2 {
					if parser.eof {
						return yaml_parser_set_reader_error(parser,
							"incomplete UTF-16 character",
							parser.offset, -1)
					}
					break inner
				}

				// Get the character.
				value = rune(parser.raw_buffer[parser.raw_buffer_pos+low]) +
					(rune(parser.raw_buffer[parser.raw_buffer_pos+high]) << 8)

				// Check for unexpected low surrogate area.
				if value&0xFC00 == 0xDC00 {
					return yaml_parser_set_reader_error(parser,
						"unexpected low surrogate area",
						parser.offset, int(value))
				}

				// Check for a high surrogate area.
				if value&0xFC00 == 0xD800 {
					width = 4

					// Check for incomplete surrogate pair.
					if raw_unread < 4 {
						if parser.eof {
							return yaml_parser_set_reader_error(parser,
								"incomplete UTF-16 surrogate pair",
								parser.offset, -1)
						}
						break inner
					}

					// Get the next character.
					value2 := rune(parser.raw_buffer[parser.raw_buffer_pos+low+2]) +
						(rune(parser.raw_buffer[parser.raw_buffer_pos+high+2]) << 8)

					// Check for a low surrogate area.
					if value2&0xFC00 != 0xDC00 {
						return yaml_parser_set_reader_error(parser,
							"expected low surrogate area",
							parser.offset+2, int(value2))
					}

					// Generate the value of the surrogate pair.
					value = 0x10000 + ((value & 0x3FF) << 10) + (value2 & 0x3FF)
				} else {
					width = 2
				}

			default:
				panic("impossible")
			}

			// Check if the character is in the allowed range:
			//      #x9 | #xA | #xD | [#x20-#x7E]               (8 bit)
			//      | #x85 | [#xA0-#xD7FF] | [#xE000-#xFFFD]    (16 bit)
			//      | [#x10000-#x10FFFF]                        (32 bit)
			switch {
			case value == 0x09:
			case value == 0x0A:
			case value == 0x0D:
			case value >= 0x20 && value <= 0x7E:
			case value == 0x85:
			case value >= 0xA0 && value <= 0xD7FF:
			case value >= 0xE000 && value <= 0xFFFD:
			case value >= 0x10000 && value <= 0x10FFFF:
			default:
				return yaml_parser_set_reader_error(parser,
					"control characters are not allowed",
					parser.offset, int(value))
			}

			// Move the raw pointers.
			parser.raw_buffer_pos += width
			parser.offset += width

			// Finally put the character into the buffer.
			if value <= 0x7F {
				// 0000 0000-0000 007F . 0xxxxxxx
				parser.buffer[buffer_len+0] = byte(value)
				buffer_len += 1
			} else if value <= 0x7FF {
				// 0000 0080-0000 07FF . 110xxxxx 10xxxxxx
				parser.buffer[buffer_len+0] = byte(0xC0 + (value >> 6))
				parser.buffer[buffer_len+1] = byte(0x80 + (value & 0x3F))
				buffer_len += 2
			} else if value <= 0xFFFF {
				// 0000 0800-0000 FFFF . 1110xxxx 10xxxxxx 10xxxxxx
				parser.buffer[buffer_len+0] = byte(0xE0 + (value >> 12))
				parser.buffer[buffer_len+1] = byte(0x80 + ((value >> 6) & 0x3F))
				parser.buffer[buffer_len+2] = byte(0x80 + (value & 0x3F))
				buffer_len += 3
			} else {
				// 0001 0000-0010 FFFF . 11110xxx 10xxxxxx 10xxxxxx 10xxxxxx
				parser.buffer[buffer_len+0] = byte(0xF0 + (value >> 18))
				parser.buffer[buffer_len+1] = byte(0x80 + ((value >> 12) & 0x3F))
				parser.buffer[buffer_len+2] = byte(0x80 + ((value >> 6) & 0x3F))
				parser.buffer[buffer_len+3] = byte(0x80 + (value & 0x3F))
				buffer_len += 4
			}

			parser.unread++
		}

		// On EOF, put NUL into the buffer and return.
		if parser.eof {
			parser.buffer[buffer_len] = 0
			buffer_len++
			parser.unread++
			break
		}
	}
	// [Go] Read the documentation of this function above. To return true,
	// we need to have the given length in the buffer. Not doing that means
	// every single check that calls this function to make sure the buffer
	// has a given length is Go) panicking; or C) accessing invalid memory.
	// This happens here due to the EOF above breaking early.
	for buffer_len < length {
		parser.buffer[buffer_len] = 0
		buffer_len++
	}
	parser.buffer = parser.buffer[:buffer_len]
	return true
}